Configuring Modem Connection Settings; Figure 13 Hyperterminal Connection Description Dialog Box - Nortel Contivity 100 Setting Up

3
Plug the other end of the cable into the serial (COM) port on the PC.
4
Turn on the modem.

Configuring modem connection settings

To configure modem connection settings, you must set the modem to answer on
the first ring (auto-answer) with the command string:
enable you to configure the modem to auto-answer using DIP switch settings.
Refer to your modem's documentation for instructions.
This procedure provides instructions for configuring modem connection settings
using the HyperTerminal terminal emulation software on a PC using a modem
speed of 9600 baud and the COM1 port.
To configure modem connection settings using HyperTerminal:
1
Start the HyperTerminal software.
The Connection Description dialog box opens

Figure 13 HyperTerminal Connection Description dialog box

2
In the Name box, enter a name for the connection.
3
In the Icon area, select an icon for the connection.
4
Click OK.
Chapter 6 Out-of-band management support
(Figure
Setting Up the Contivity 100 Unit
. Some modems
ats0=1&w
13).
67