Ordering Data; Metal-Free Area - Siemens SIMATIC Ident System Manual

7.2.2

Ordering data

Table 7- 1
MDS D100
Table 7- 2
Spacer
(in conjunction with fixing pocket 6GT2190-0AB00)
Fixing pocket
(in conjunction with spacer 6GT2190-0AA00)
Fixing pocket
(not suitable for fixing directly onto metal)
7.2.3

Metal-free area

Direct mounting of the MDS D100 on metal is not allowed. A distance of ≥ 20 mm is
recommended. This can be achieved using the spacer 6GT2190-0AA00 in combination with
the fixing pocket 6GT2190-0AB00.
Mounting on metal
h
①
②
③
Figure 7-2
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
Ordering data for MDS D100
Ordering data for MDS D100 accessory
≥ 20 mm
Data memory
Metal
Non-metal
Mounting of the MDS D100 on metal with spacer
Transponder
7.2 MDS D100
Article number
6GT2600-0AD10
Article number
6GT2190-0AA00
6GT2190-0AB00
6GT2390-0AA00
189