Tronic TUL 4.1 A1 User Manual And Service Information page 9


To disconnect a cable, hold the universal charger and pull on the plug, not
the cable.

A damaged power cord can cause fire or an electric shock. Check the
power cord from time to time. Never use adapter plugs or extension cables
that do not comply with the current safety regulations in your country, and do
not modify the wall plug power adapter or the power cord yourself!
Power supply
The device consumes electricity in standby mode. In order to completely
disconnect the device from the mains, the built-in wall plug power adapter must
be disconnected from the wall outlet. For this reason, the device should be
positioned in so as to assure direct and unobstructed access to the wall outlet
so that the built-in wall plug power adapter can be pulled out immediately in
an emergency. To avoid the risk of fire, if the integrated wall plug power
adapter is not going to be used for a while (e.g. during holidays) it should
always be disconnected from the mains. If there is the risk of a thunderstorm or
lightning, disconnect the device from the power supply.
Use only the TYTM1200070EU wall plug power adapter supplied and the
supplied car adapter to avoid overheating, deformation of housing, fire,
electric shock, explosions and other dangers. Never connect the wall plug
power adapter or the car adapter to other devices.
TRONIC TUL 4.1 A1
English - 7