Superior Fireplaces DRT3035DEN-C Installation And Operation Instructions Manual page 62

Innovative Hearth Products
DRT3000-C Series Direct-Vent Gas Fireplaces
Installing the DRT3000-C 45 Series Log Set (continued)
4. Place the Bottom Left Log (2) on to the left floor tab (a). (Figures 55 and 57).
5. Place the Middle Ember Log (3) on to the two small tabs (c & d) on the burner with the small side pointing to the left. (Figure 58).
Figure 57 - Place Bottom Left Log (2)
2
6. Place the "Y" end of the Right Twig Log (4) on to the grate shown and the other end will lay on to the landing groove (Figure 58) on the right
side of the Rear Log (1) (Figure 59).
7. Place the Left Twig Log (5) with the pin hole on to the Bottom Left Log (2) pin (Figure 57) and place the small end against the left side of
the grate as shown (Figure 60).
Figure 59 - Back Right Log (4)
Pin for Log (5)
2
8. Place the "Y" end of the Middle Twig Log (6) on to the middle grate
and the pin hole on to the pin (Figure 59) on the left side of the Rear
Log (1) (Figure 61).
Figure 61 - Place Middle Twig Log (6)
2
62
1
Fits over Tab "a"
(Figure 55)
Bottom View
Pin for Log (6)
1
4
3
Log (4) straddles
this grate tine
6
3
Log (6) straddles
this grate tine
Figure 58 - Place Middle Ember Log (3)
Fits over Tab "c"
(Figure 55)
Figure 60 - Place Left Twig Log (5)
2
Fits over Pin on Log (2) (Figure 59)
1
4
3
Bottom View
5
3
Place log (5) against
left side this grate
Fits over Pin on Log (1) (Figure 59)
Bottom View
Operation
900966-00B, 04/2019
Landing for
Log (4)
1
Fits over Tab "d"
(Figure 55)
1
4
Bottom View
Place against left side
of 2nd grate tine