Steering Knuckle / Bearing - Suzuki WagonR+ RB310 Service Manual

3D-6 FRONT SUSPENSION

Steering Knuckle / Bearing

Components
1. Wheel hub
2. Circlip
3. Wheel bearing:
Face grooved rubber seal side to
wheel hub.
4. Steering knuckle
• Install wheel and tighten wheel bolts to specified torque.
Tightening torque
Wheel bolt (a) 95 N
• Confirm front end (wheel) alignment, referring to Section 3A.
5. Dust cover
6. Tie-rod end
7. Wheel speed sensor (if equipped)
8. Drive shaft nut:
Calk, after tightening.
·
m (9.5 kg-m, 69.0 lb-ft)
9. Tie-rod end nut
10. Control arm ball stud bolt
11. Strut bracket bolt:
Insert from the direction as
shown.
12. Brake caliper carrier bolt
13. Brake disk screw
14. Brake disc
Tightening torque
Do not reuse.