1B-18 AIR CONDITIONING (OPTIONAL)
Cooling Unit (Evaporator)
NOTE:
For M13 and G10 engine models, refer to the same section of the Service Manual mentioned in the
"FOREWORD" of this service manual.
Z13DT Engine Model
1. Evaporator
2. Expansion valve
7
3. Evaporator case
5. Drain hose
4. Packing
6. Air inlet door
Removal
Z13DT Engine Model
1) Disconnect negative (–) cable at battery.
2) If equipped with air bag system, disable air bag system refer-
3) Recover refrigerant from refrigeration system by using recov-
4) Remove heater control cable, main harness clamp.
5) Remove 20-pin connector from supplementary heater con-
4
5
7. Supplementary heater controller (if equipped)
ring to "Disabling Air Bag System" in Section 10B.
ery and recycling equipment referring to "Operation Proce-
dure for Refrigerant Charge" in this section.
troller and two connectors located on supplementary heater
controller.