2001 > 1.8L DOHC >
INSPECTION
Check condenser fan operation
1. Disconnect condenser fan connector.
2. Apply 12V to terminal A (L) and ground terminal B (B) and verify that condenser fan operates.
3. If condenser fan does not operate, replace condenser fan.
4. If condenser fan operates, go to "Measure voltage at condenser fan".
Measure voltage at condenser fan
1. Disconnect condenser fan connector.
2. Run engine at idle.
3. Turn A/C and blower switches ON.
4. Measure voltage at following terminal wire of condenser fan connector.
Wire
A
(L)
Condenser fan relay
1. Disconnect condenser fan relay from fuse box in engine compartment.
2. Check continuity between terminals as relay.
Voltage
0V
12V
Terminals
Proceed to inspection
Replace condenser fan
Continuity
Action