Kia Sorento 2001 General Information Manual page 1105

Installation
Power window regulator
1. Install run channel.
2. Install glass guide.
A. Position glass guide as originally installed through access hole.
B. Install one bolt and one nut loosely.
3. Install power window regulator assembly.
A. Position power window regulator assembly as originally installed through access hole.
B. Install six mounting nuts.
Tightening torque : 61~86 lb-in (7~10 N-m, 70~100 kg-cm)
C. Connect electrical connector for power window motor.
4. Install window glass
A. Position glass carefully. Hold glass from both its inner and outer surfaces, and while tilting it towards
hinge side of door, place it on small bracket on window regulator assembly.
B. Install two glass mounting bolts on power window regulator assembly loosely.