Kia Sorento 2001 General Information Manual page 1087

Tightening torque : 26~34 lb-in (2~4 N-m, 30~40 kg-cm)
5. Install door speaker with three mounting screws.
6. Install pull handle bracket with one mounting screw.
7. Install door trim.
8. Install inside door handle cover with one mounting screw.
9. Fasten door trim. Refer to "Trim" in this section.
10. Install inner weatherstrip.
11. Connect negative battery cable.
Installation
Power door lock cylinder
1. Install lock cylinder in outside door handle.
2. Install lock cylinder retainer on outside door handle.
3. Position outside door handle as originally positioned.
4. Install two mounting nuts.
Tightening torque : 61~86 lb-in (7~10 N-m, 70~100 kg-cm)
5. Connect lock cylinder rod of door lock assembly to door lock cylinder of door handle.
6. Connect outside door handle rod of door lock assembly to outside door handle.
7. Install plastic door screen.
A. Fasten plastic door screen.
B. Route electrical harness connector from plastic door screen.