C.1 General Information - Siemens SIMATIC S7-400H Manual

Converting from S5-H to S7-400H
This appendix will help you to convert to fault-tolerant S7 systems if you are
already familiar with fault-tolerant systems of the S5 family.
Generally speaking, knowledge of the STEP 7 configuration software is required
for converting from the S5-H to the S7-400H.
C.1 General Information
Documentation
The following manuals are available for familiarization with the STEP 7 standard
software:
Configuring Hardware and Communication Connections STEP 7 V5.1
Programming with STEP 7 V5.1
The following reference manuals describe the individual programming languages.
System and Standard Functions
STL, LAD, FBD for S7-300/400
The From S5 to S7 manual will support you while you are converting and provides
detailed information.
S7-400H Programmable Controller Fault-Tolerant Systems
A5E00068197-04
C
C-1