Siemens SIMATIC S7-400H Manual page 200

Function Modules and Communication Processors Used on the S7-400H
Module
Communications processor
CP342-2 (ASI bus interface
module)
Communications processor
CP443-5 Basic (PROFIBUS;
S7 communications)
Communications processor
CP443-5 Extended
(PROFIBUS; master on the DP
PROFIBUS)
1)
has to be upgraded to MLFB 6GK7 443-1EX02-0XE0
FMs and CPs for distributed one-way use
Note
You can use all the FMs and CPs released for the ET 200M with the S7-400H
distributed and one-way.
FMs and CPs for distributed switched use
Communications processor CP341-1
(point-to-point connection)
Counter module 350-1
Counter module 350-2
CAM module FM352
Controller module FM 355 C
Controller module FM 355 S
E-2
Order no.
6GK7342-2AH01-0XB0
6GK7443-5FX01-0XE0
6GK7443-5DX02-0XE0
Module
6ES7341-1AH00-0AE0
6ES7341-1AH01-0AE0
6ES7350-1AH01-0AE0
6ES7350-2AH00-0AE0
6ES7352-1AH01-0AE0
6ES7355-0VH10-0AE0
6ES7355-1VH10-0AE0
S7-400H Programmable Controller Fault-Tolerant Systems
Release
hardware version 1 or later
with firmware version V1.10
or higher
hardware version 1 or later
hardware version 1 or later
with firmware version V3.0.0
or higher
Order no.
hardware version 3 or
later
hardware version 1 or
later
with firmware version
V1.0.0 or higher
hardware version 1 or
later
hardware version 2 or
later
hardware version 4 or
later
hardware version 4 or
later
hardware version 3 or
later
one- redun-
way dant
Yes Yes
Yes Yes
Yes Yes
Release
A5E00068197-04