Setting Ip Address - AOpen AOP-111 User Manual

Re-type new password, confirm the new password.
Change password button: save the new password to the print server.
The print server will verify your password (it will ignore the Us er Name
item) when you save the configuration.
Make sure to res et the print server (desc ribed in sec tion 8.3.11
System Utilities) to let the changes take effec t.
8.3.7

Setting IP Address

The IP Cfg page allows you to configure the IP address where the print
server is to be located. The print server will obtain its IP address
automatically by the protocol DHCP, BOOTP, RARP if you configure the IP
address as Auto. Click Save to print server button to save the c onfiguration
to the print server.
The print server will verify your password (it will ignore the Us er Name
item) when you save the c onfiguration. Make sure to res et the print server
(described in section 8.3.11 System Utilities) to let the changes take
effec t.
8.3.8 Configuring DHCP Parameters
The print server c an be c onfigured as DHCP s erver to provide dynamic
IP addresses assignment. The DHCP Cfg page allows you to set:
All manuals and user guides at all-guides.com
82