AOpen AOP-111 User Manual page 56

Lines should be indented with tabs . More than one printer name can be used,
with variants separated by vertical bars (name1|name2).
The rm= entry should correspond to the IP address you have assigned to the
print s erver. You can also use a hos t name if you have ass igned one in the
/etc /hos ts file.
The sd= entry should correspond to the spool directory you created in the
previous step.
The rp= entry s hould correspond to the port name of the remote printer. The
values should be one of lpt1, lpt2 or lpt3 depends on the printer port.
The print server should now be available for printing from your Unix hos t.
All manuals and user guides at all-guides.com
:lp=:\
:rm=203.66.191.186:\
:rp=lpt1:\
:lf=/var/spool/lpd/pserverd.log:\
:sd=/var/spool/lpd/pserverd:\
:mx#0:
56