Table of Contents
Advertisement
1. Unpack the print server package and check all the items lis ted in sec tion
1.2.
2. Connect the print server to the printer you want to share on the network
by s tandard USB cable.
3. Connect the power adapter to the print server.
4. The print server will perform the Power-On-Self-Tes t (POST) after it is
powered on. The Status LED will flash 6 times to indicate that the print
server is ready.
NOTE1 : MUST use the power adapter shipped with the print server, do NOT use any other
power adapter from any sources.
NOTE2: To prevent the compatibility problem between print server and a few printer, it is
recommand that you power on the print server before the printer.
All manuals and user guides at all-guides.com
2 .
H a r d w a r e I n s t a l l a t i o n
15
Advertisement
Table of Contents
