Dhcp Cfg - Dhcp Server Configure - AOpen AOP-111 User Manual

All manuals and user guides at all-guides.com
7.12

DHCP Cfg - DHCP Server Configure

The print server can be configured as DHCP server to provide dynamic IP
addresses ass ignment. The DHCP Cfg page allows you to s et:
The DHCP s tartup, which determine if the print server will act as DHCP
server. If this item is set to Auto, the print server will detec t if there is any
DHCP s erver on the network when it boots up. If there is no DHCP s erver on
the network , then the print server will configure itself as DHCP s erver;
otherwise it will disable this func tion.
DHCP s etup is used to configure TCP/IP parameters that will be ass igned to
a DHCP client. If this item is set to Auto, the print server will determine all
TCP/IP parameters automatic ally; otherwise you will configure the following
parameters:
IP Address: specifies the IP address of print server itself.
Starting IP: specifies the s tarting IP address for assigning to DHCP c lients .
IP range: specifies how many IP addresses are available to DHCP c lients .
Gateway IP: gives the IP address of the default gateway.
Netmask : gives the network mask.
DNS server: gives the IP address of the domain name server.
The Write button: save the configuration to the print server.
The Reset button: reset the print server to let the changes take effec t.
69