Table of Contents
Advertisement
4. Choos e NetWare Configuration from the menu.
5. Selec t Print server in the Printing mode field.
6. Change the Alias name if you want.
7. Set the Primary File Server to be the file server where the print s erver's
queue will be located.
8. Press Escape to exit the Print Server Configuration screen, confirm that
the changes should be s aved, and exit PSETUP.
At this point the print server setup is complete, and you can begin setting up
the NetWare print server and print queue objec ts :
9.
Run the NetWare PCONSOLE program.
10.
Change the current file server, if necessary, using the Change Current
File Server menu s elec tion.
All manuals and user guides at all-guides.com
45
Advertisement
Table of Contents
