Replacing The Wheels - Ferrari F430 Spider Owner's Manual

Replacing the puncture repair fluid
cartridge
• Remove the terminal from the union
H
J on the cartridge and remove the union
G for the transparent tube from the
compressor.
• Turn the cartridge A counterclockwise
and lift it slipping it off the base; replace
it with an original spare part.
• Insert the new cartridge A into the base
and push it until hearing its fitting click
into place in the base.
• Turn it clockwise until it fits snugly into
place.
• Place the union into its seat and fit the
G
lever terminal H onto the union
cartridge.
1
1
2
CLOSE
Useful accessories
As well as the tools supplied with the
vehicle, the hazard warning triangle and
fluorescent safety jacket should always be
kept on board in order to signal hazardous
situations in compliance with regulations.
100

Replacing the wheels

If one or more wheels need to be
replaced, proceed as follows:
- Replace the stud bolts with damaged
threads or cone.
- Carefully clean the stud bolts before
fitting.
- Absolutely do not lubricate the contact
surfaces between the stud bolt and the
wheel and between the wheel and the
brake disk.
In order not to remove the anti-lock
treatment, do not clean the wheel cones
with solvents or aggressive products.
J of the
2
OPEN
A
Spare wheel (optional)
On request, the vehicle can be equipped
with a kit containing:
• Spare wheel with space saver tire/
A
wheel. The label B on the spare wheel
indicates the maximum permitted speed
of 50 mph (80 km/h).
• Additional toolkit C containing: jack and
wrench to fasten the wheel stud bolts.
A
B
C