Initialization Method; Controller - Omron NJ Series Network Connection Manual

8. Initialization Method

This document explains the setting procedure from the factory default setting.
If the device settings have been changed from the factory default setting, some settings may
not be applicable as described in this procedure.

8.1. Controller

To initialize the Controller, it is necessary to initialize the CPU Unit and DeviceNet Unit.
Change to the PROGRAM mode before initialization.
8.1.1. DeviceNet Unit
To initialize the settings of the DeviceNet Unit, select Edit Special Unit Settings of
CJ1W-DRM21 in CPU/Expansion Racks from the Sysmac Studio.
Select Clears the scan list from the Scan List Clear Switch.
Click the Apply Button and the Transfer to Controller Button.
8. Initialization Method
38