Omron NJ Series Network Connection Manual page 21

3
Use the procedure on the right
to set the display selection.
[b037] Display selection: 01
*Set "01" (Individual display of
functions).
*The parameters on the
following step are not displayed
when the factory default setting
(04: Basic display) is used.
a002
Press the
b001
b001 parameter is displayed.
Press the
b037
Press the
04
Press the
00
Change the data to "00".
Press the
b037
7. Connection Procedure
The parameter is displayed.
Mode Key once.
Increment Key four times.
b037 parameter is displayed.
Enter Key.
The initial data is displayed.
Increment Key four times.
Enter Key.
The parameter is displayed again.
18