3
Unscrew and remove the
optional board cover.
*For details on how to install the
DeviceNet Communications
Unit, refer to 2-2 Installation in
the DeviceNet Communications
Unit User's Manual (Cat.No.
I581).
4
Unscrew and remove the
terminal block cover.
5
Connect the Grounding Cable of
the DeviceNet Communications
Unit to the Inverter.
6
If the terminal block cover is
removed, mount it again and
tighten the screw.
1-phase 200 V 0.1 - 2.2 kW
3-phase 200 V 0.1 - 3.7 kW
3-phase 400 V 0.4 - 4.0 kW
7. Connection Procedure
3-phase 200 V 5.5 - 15 kW
3-phase 400 V 5.5 - 15 kW
14