Omron NJ Series Network Connection Manual page 51

10. Appendix 2 Setting Procedure without the Configuration Files
10.3.5. Going Online and Transferring the Project Data
Connect online with the Sysmac Studio and transfer the project data to the Controller. After
transfer, reset the Controller.
Always confirm safety at the destination node before you transfer a user
program, configuration data, setup data, device variables, or values in memory
used for CJ-series Units from the Sysmac Studio.
The devices or machines may perform unexpected operation regardless of the
operating mode of the CPU Unit.
Always confirm safety before you reset the Controller or any components.
1
Select Communications Setup
from the Controller Menu.
2
The Communications Setup
Dialog Box is displayed.
Select the Direct connection via
USB in the Connection Type
Field.
Click the OK Button.
48