Campbell Hausfeld HV2000 Series Operating Instructions & Parts Manual page 4

Operating Instructions & Parts Manual
General Safety
(Continued)
5. When using an extension cord, be
sure it is in good condition and
heavy enough to meet the specifi-
cations in the chart below. If an
extension cord is needed, the fol-
lowing wire sizes must be used (See
Chart 1)
Extension Cord Requirements
25' cord . . . . . . 10,12, or 14 Gauge
50' cord . . . . . . . . . 10 or 12 Gauge
100' cord . . . . . . . . . . . . . 10 Gauge
Chart 1
Set-Up
Figure 3
Figure 4
www.campbellhausfeld.com
Hose fitting
Attach hose
Figure 5
On/Off
Button
Figure 6
Notice: Gun may be rested in body of
turbine when not in use. (Figure 7).
Figure 7
Note: Refer to Spray Gun manual for
spraying instructions.
4
Attach hose to gun