Pws-100Nm1 Connection Settings - Sony HDCU4300 Operation Manual

Paint function
OHB Matrix
ATW
ALAC

PWS-100NM1 Connection Settings

When an HKCU-IP43F is installed and a PWS-100NM1 IP
Live System Manager station is connected, settings on the
NETWORKED MEDIA INTERFACE page and IP LIVE
SNMP agent settings
Item
Enable/Disable
IP Address
Port
sysName
sysContact
sysLocation
Sub Agent List
V1/V2c
Enable/Disable
Name
Version
Access Mode
ACL Network Address 0.0.0.0 to 255.255.255.255
ACL Prefix Length
Trap Settings dialog
Item
Enable/Disable
Name
Network Interface Name
IP Address
Port
Version
Type
ON/OFF
User Matrix R-G/G-B/B-R/R-B/G-R/B-G
Multi Matrix Phase
Multi Matrix Hue/Saturation
ON/OFF
Speed
ON/OFF
Set value (defaults are
underlined)
Enable, Disable
0.0.0.0
161
–
–
–
–
Enable, Disable
public
V2C
READ_ONLY
0 to 32
Set value (defaults are
underlined)
Enable, Disable
public
LAN1, LAN2
0.0.0.0 to 255.255.255.255
162
V2C
TRAP
COLOR SPACE setting
BT.709
Yes
Yes
Yes
Yes
SYSTEM MANAGER page must be configured in the
NETWORK menu and also on the PWS-100NM1.
Meaning
Fixed value
Address for listening for both LAN1 and LAN2.
Fixed value
ASCII code, up to 63 characters
ASCII code, up to 63 characters
ASCII code, up to 63 characters
Setting not required
ASCII code, up to 32 characters
Fixed value
Fixed value
When set to 0.0.0.0, all access is denied.
When set to 0, all access is denied.
Meaning
ASCII code, up to 32 characters
Specifies the network to send trap notifications.
Specifies the trap destination.
SNMP walk/get from the specified trap destination is supported.
Fixed value
Fixed value
23
BT.2020
BT.2020 COLOR MODE setting
WIDE-F WIDE-BC
No Yes
No Yes
No Yes
No Yes
Yes
Yes
Yes