Sony HDCU4300 Operation Manual page 25

• A "-" mark is displayed for each item when a camera is not
connected.
System status
* S ystem Status*
C HU Mode :HDC4300
R eference:1080/59. 94 I Lo ck ed
S lot1 :1080/59. 94 P( 3x )/ 3G -B
S lot2-1 :1080/59. 94 P/ 3G -A
2-2 :1080/59. 94 P/ 3G -B
2-3 :1080/59. 94 P/ Li nk -A
2-4 :1080/59. 94 P/ Li nk -B
S lot3-1 1080/59. 94 I
3-2 525/59.9 4I
CHU Mode: CHU MODE (connected camera) setting
Reference: Reference signal format used and genlock status
("Not detected" is displayed when a reference signal is not
input)
Slot1: Output signal format of SLOT1
Slot2: Output signal format of each connector of SLOT2
Slot3: Output signal format of each connector of SLOT3
Camera system diagnostics
* S ystem Diagnosis*
O ptical Condition
CAM ssxxxxxxg O K
CCU ssxxxxxxg W ar ni ng
Camera Cable :Con ne ct ed
Power S upply :OK
Cable L ength : 10 0m
Network
Link Status :U p
CCU No. :1 0
Optical Condition CAM: Camera light sensor level
Optical Condition CCU: Unit light sensor level
Camera Cable: Camera cable connection status
Power Supply: Camera power supply status
Cable Length: Cable length
Network Link Status: LAN connection status
CCU No.: CCU number setting status
Camera and unit audio status
*Au dio *
Ca mer a
0 1/ 05
CC U
Camera MIC Gain CH1: Camera microphone circuit 1 amp
gain status
Camera MIC Gain CH2: Camera microphone circuit 2 amp
gain status
CCU Audio Out: Output format of the AUDIO OUT connector
of the unit
Camera and unit intercom status
*In ter com *
Ca mer a
0 2/ 05
CC U
Camera Engineer: Camera microphone status of the ENG
line of the camera
Camera Producer: Camera microphone status of the PROD
line of the camera
CCU MIC/PGM: Status of MIC/PGM switch on the front of the
unit
CCU Line: Intercom system connection status
25
M IC Gai n C H1 :6 0dB
C H2 :6 0dB
A udi o O ut :A ES/ EBU
E ngi nee r :M IC On
P rod uce r :M IC Off
M IC/ PGM :M IC Off
L ine :S yst em
0 3/0 5
0 4/0 5