Name and Function of Parts
Front Panel
3
1
2
8
a Red tally indicator
Lights in red when this unit receives a red tally signal. You can
attach the supplied number plate here.
b Yellow tally indicator
Lights in yellow when this unit receives a yellow tally signal.
c Green tally indicator
Lights in green when this unit receives a green tally signal.
d CCU number display
Displays the camera number set in the CCU menu.
e NMI STATUS indicator
Displays the NMI-LAN status.
Green: Normal status
Flashing green: Network synchronization in progress
Off: SFP+ module is not installed.
Disconnected from IP Live System Manager.
Connection with IP Live System Manager in progress
Flashing red: Not locked to network sync signal. Signal
reception is unavailable.
f Status display indicator
REF IN (green): Indicates presence of reference input signal.
UNLOCK (Red): The input REFERENCE is not locked.
NETWORK: Displays the status when there is a network
system connection.
4
5
6
9
0
qa
qs
qd
7
qf
On: When CNS SETTING in the NETWORK SETTING
menu is set to either BRIDGE or MCS, this indicates
that external control equipment (MSU-1000/1500
Master Setup Unit, RCP-1000 series Remote Control
Panel, or other equipment) is connected.
Flashing: When CNS SETTING in the NETWORK
SETTING menu is set to either BRIDGE or MCS, this
indicates that the unit cannot connect correctly with
the external control equipment (MSU-1000/1500
Master Setup Unit, RCP-1000 series Remote Control
Panel, or other equipment).
Off: When CNS SETTING in the NETWORK SETTING
menu is set to either BRIDGE or MCS, this indicates
that a LAN cable is not connected or that the network
system connection settings have not been
configured.
When CNS SETTING in the NETWORK SETTING
menu is set to LEGACY, this remains turned off.
COM ERROR (Red): Communication with the camera or
external control equipment (such as the RCP-1000 series
Remote Control Panel) is not possible.
FAN STOP (Red): The fan is stopped.
6