Sony HDCU4300 Operation Manual page 53

SDI OUTPUT • 3G/HD SDI OUTPUT (SLOT1)
BNC-type (8)
3G-SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
3G-SDI/HD-SDI switchable
• 3G/HD/SD SDI OUTPUT (SLOT2)
BNC-type (4)
3G-SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD-SDI: SMPTE ST259, 0.8 Vp-p,
75 ohms, 270 Mbps
3G-SDI/HD-SDI/SD-SDI, character signal
selectable
Supplied accessories
Number plates (1 set)
Operation guide (1)
Operation manual (CD-ROM) (1)
Optional accessories
United States and Canada: Power cord set (1-551-812-XX)
Other areas: Power cord set (1-782-929-XX)
United States and Canada: Plug holder B (2-990-242-01)
Other areas: Plug holder C (3-613-640-01)
CCA-5-3 Connection Cable (3 meters),
CCA-5-10 Connection Cable (10 meters)
Maintenance Manual
Related devices
HDC4300 Color Camera
HDC-P43 Multi Purpose Camera
RCP-1000 Series Remote Control Panel
MSU-1000 Series Master Setup Unit
HZC-CSM10 Camera System Management Software
SZC-4002/4002M/4002W HFR Software
SZC-2001/2001M/2001W HD CUTOUT Software
HKCU-IP43F Networked Media Interface Board
HKCU-4002 12G-SDI Extension Kit
HKCU-IP43F
General
Power consumption 18.2 W
5 °C to 40 °C (41 °F to 104 °F)
Operating
temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage temperature
Dimensions (w/h/d, NET board: Approx. 94 × 10 × 227 mm
3
excluding protrusions) (3 / ×
4
CN board: Approx. 55 × 22 × 136 mm
1
(2 / ×
4
Mass NET board: Approx. 0.18 kg (6.3 oz.)
CN board: Approx. 0.14 kg (4.9 oz.)
13
/ × 9 inches)
32
7 3
/ × 5 / inches)
8 8
Output connectors
CN board: NMI-LAN SFP+ (2)
10G BASE-** (using SFP+ transceiver
module)
Supplied accessories
30-pin cable (1)
Harnesses (4)
Screws (M3 × 8) (5)
Installation Guide (1)
Related devices
OTM-10GSR1 SFP+ transceiver module
HKCU-4002
General
Power consumption 3 W
Operating temperature 5
Storage temperature –20
Dimensions (w/h/d, DIF board: 80 × 150 × 24 mm
(3
excluding protrusions)
Mass DIF board: Approx. 0.16 kg (5.6 oz.)
Output connectors
DIF board: BNC type (2)
12G-SDI: SMPTE ST2082, 0.8 Vp-p,
75
6G-SDI: SMPTE ST2081, 0.8 Vp-p, 75 ohms,
5.940 Gbps/5.934 Gbps
12G-SDI/6G-SDI switchable
Supplied accessories
40-pin cable (1)
Harnesses (2)
Operating Instructions (1)
Design and specifications are subject to change without
notice.
Notes
• Always verify that the unit is operating properly before use.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF THIS
UNIT, EITHER DURING THE WARRANTY PERIOD OR
AFTER EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY
KIND MADE BY USERS OF THIS UNIT OR MADE BY
THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE TERMINATION
OR DISCONTINUATION OF ANY SERVICES RELATED
TO THIS UNIT THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
53
°C °C
to 40 (41 °F to 104 °F)
°C °C
to +60 (–4 °F to +140 °F)
1 31
/ × 6 × / inches)
4 32
ohms
, 11.880 Gbps/11.868 Gbps