Ii-4-2 Mesh Status - Draytek VigorAP 903 User Manual

II-4-2 Mesh Status

This page shows that one Mesh Group can contain up to 8 devices. In the following figure, the 7th Device
with hop 0 is one special Ethernet Backhaul. It means this node will use Ethernet cable to join the mesh
group while others use the wireless link.
Item
Local Status
Devices
Total number of
Clients
Description
Display general information for such VigorAP.
Display detailed information for this VigorAP (as mesh root) and mesh
node(s) in the group.
Index – Display the number of the device within a mesh group.
Status – Display the role of the device within a mesh group.
Device Name – Display the name of the device (for identification).
IP Address – Display the IP address of the device.
MAC Address – Display the MAC address of the device.
Hop – Display the level of the devices within a mesh group. "0" means the
access point is connected to a device by using Ethernet cable (wired). "1"
to "3" means the level of the access point within a mesh group and it
connects to other access point via wireless link.
Uplink – Display the MAC address of the device that the AP connects to.
Display the station list of all mesh devices.
74