Draytek VigorAP 903 User Manual page 86

While using Universal Repeater mode, the access point will demodulate the received signal. Please
check if this signal is noise for the operating network, then have the signal modulated and amplified
again. The output power of this mode is the same as that of AP mode.
Available settings are explained as follows:
Item
SSID
MAC Address
(Optional)
Channel
Security Mode
Description
Display the SSID defined for Range Extender operation mode in Quick Start
Wizard.
Change the name of SSID whenever you want.
Type the MAC address of access point that VigorAP 903 wants to connect
to.
Means the channel of frequency of the wireless LAN. You may switch
channel if the selected channel is under serious interference. If you have
no idea of choosing the frequency, please select AutoSelect to let system
determine for you.
There are several modes provided for you to choose. Each mode will bring
up different parameters (e.g., WEP keys, Pass Phrase) for you to configure.
80