Ii-3-3 Access Control - Draytek VigorAP 903 User Manual

II-3-3 Access Control

For additional security of wireless access, the Access Control facility allows you to restrict the network
access right by controlling the wireless LAN MAC address of client. Only the valid MAC address that has
been configured can access the wireless LAN interface. By clicking the Access Control, a new web page
will appear, as depicted below, so that you could edit the clients' MAC addresses to control their access
rights (deny or allow).
Available settings are explained as follows:
Item
Policy
MAC Address Filter
Client's MAC Address
Description
Select to enable any one of the following policy or disable the policy.
Choose Activate MAC address filter to type in the MAC addresses for
other clients in the network manually. Choose Blocked MAC address
filter, so that all of the devices with the MAC addresses listed on the MAC
Address Filter table will be blocked and cannot access into VigorAP 903.
Display all MAC addresses that are edited before.
Manually enter the MAC address of wireless client.
47