IV-2-4 Temperature Sensor
A USB Thermometer is now available that complements your installed DrayTek AP installations that will
help you monitor the server or data communications room environment and notify you if the server room
or data communications room is overheating.
During summer in particular, it is important to ensure that your server or data communications equipment
are not overheating due to cooling system failures.
The inclusion of a USB thermometer in compatible VigorAP will continuously monitor the temperature of its
environment. When a pre-determined threshold is reached you will be alerted via Syslog.
Temperature Sensor Settings
Available settings are explained as follows:
Item
Display Settings
Description
Temperature Calibration Offset- Type a value used for correcting the
temperature error.
120