Ii-3-1 General Setup - Draytek VigorAP 903 User Manual

II-3-1 General Setup

By clicking the General Setup, a new web page will appear so that you could configure the SSID, the
wireless channel and WDS (for 5GHz only). Please refer to the following figure for more information.
Available settings are explained as follows:
Item
Enable Wireless LAN
Enable Client Limit
Description
Check the box to enable wireless function.
Check the box to set the maximum number of wireless stations which try to
connect Internet through Vigor device. The number you can set is from 3
41
Available for
5GHz Access
Point Mode