Caution - Omron Z500 series Setup Manual

INTRODUCTION

Caution

Installation Environment Precautions
CAUTION
CAUTION
Power Supply and Wiring Precautions
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
Other Precautions
CAUTION
CAUTION
Z500
10
Setup Manual
Do not use the Z500 in environments with flammable or explosive gases.
Install the Z500 away from high-voltage devices and moving machinery to allow
safe access during operation and maintenance.
Use the Z500 with the power supply voltages specified in this manual.
Use crimp terminals for wiring. Do not connect the power supply wires by just
twisting stranded wire and connecting directly to the terminals.
Use the wire and crimp terminals of the proper sizes as specified in this manual.
Confirm that wiring has been performed correctly before turning ON the power
supply.
Cover the terminal blocks with the Terminal Block Protection Covers.
Uncovered terminal blocks can result in electric shock.
Use a DC power supply with countermeasures against high-voltage spikes (safe
extra low-voltage circuits on the secondary side).
Be sure to securely tighten the screws when mounting the Z500.
Do not attempt to dismantle, repair, or modify the Z500.
Dispose of the Z500 as industrial waste.