Removing The Rear Wheel - PIAGGIO X9 Evolution 125 2008 Service Station Manual

X9 Evolution 125

Removing the rear wheel

Removal
- Unscrew the four fixing screws and remove the
muffler and the relevant bracket;
- Unscrew the central retaining nut.
Reassembly
Carry out the previous operations in reverse order.
Locking torques (N*m)
Rear wheel axle
104 ÷ 126
screws
33÷37
Removal
Removal
- Remove the chassis external nut on the left side.
- Loosen the two nuts shown in the figure.
- Slide off the bolt and remove the swinging arm.
Reassembly
Carry out the previous operations in reverse order.
Locking torques (N*m)
swinging arm
8 ÷ 12 Nm
Rear wheel fixing
Suspensions
SUSP - 173