Table of Contents
Advertisement
Changing the menu settings
Icon/item
Mode
OTHERS
DATA CODE
z DATE/CAM
(On the Remote
Commander)
AREA SET
SUMMERTIME
z OFF
BEEP
z MELODY
COMMANDER
z ON
DISPLAY
z LCD
Note
If you press DISPLAY/BATT INFO with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected
to the output jacks on the TV or VCR.
Meaning
To display date, time and various settings during
playback when you press DATA CODE on the
Remote Commander (p. 54)
DATE
To display date and time during playback when
you press DATA CODE on the Remote
Commander
——
Temporarily change the area where you are using
your camcorder
Not during summer time
ON
During summer time
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
NORMAL
To output the beep instead of the melody
OFF
To cancel melody, the beep sound and shutter
sound
To activate the Remote Commander supplied
with your camcorder
OFF
To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR's remote control
To show the display on the LCD screen and in the
viewfinder
V-OUT/LCD
To show the display on the TV screen, LCD screen
and in the viewfinder
(continued on the following page)
POWER
switch
233
Hide quick links:
Advertisement
Table of Contents
