Accessing Xt Series Web Interface - Avaya Scopia XT Series User Manual

5. Using the keypad, type the same number used in the Remote control code field.
6. Select Finish in the web interface, or select OK on the endpoint.

Accessing XT Series Web Interface

About this task
This procedure describes how to access the Avaya Scopia
the following internet browsers:
• Internet Explorer version 8 or later
• Google Chrome version 11 or later
• Mozilla Firefox version 3.6 or later
• Apple Safari version 5 or later
• Opera version 11 or later
If you deployed the XT Series as a server with no monitor, you must first retrieve the unit's IP address,
as described in Deployment Guide for Avaya Scopia
IP address at the top bar of the endpoint's monitor.
Before you begin
Web access is enabled by default. If it was disabled, you can enable it and configure the security details
as described in Deployment Guide for Avaya Scopia
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
Figure 8: Setting the code on the XT Remote Control Unit
When the code is not the default 01, the system displays the paired remote icon with its new
code at the top-right corner of the screen.
®
XT Series web interface, which supports
®
XT Series. If you have a monitor, you can find the
®
XT Series.
Getting Started | 14