Sony Handycam DCR-PC110 Operating Instructions Manual page 88

Changing the menu settings
Icon/item
PRINT MARK
PROTECT
SLIDE SHOW
DELETE ALL
FORMAT
PHOTO SAVE
CM SEARCH
TITLEERASE
TITLE DSPL
TAPE TITLE
ERASE ALL
Notes on formatting
• Supplied "Memory Stick"s have been formatted at factory. Formatting with this
camcorder is not required.
• Do not turn the POWER switch or press any button while the display shows
"FORMATTING. "
• You cannot format the "Memory Stick" if the write-protect tab on the "Memory Stick"
is set to LOCK.
• Format the "Memory Stick" when "
Formatting erases all information on the "Memory Stick"
Check the contents of the "Memory Stick" before formatting.
• Formatting erases sample images on the "Memory Stick."
• Formatting erases the protected image data on the "Memory Stick."
88
Mode Meaning
z OFF To cancel print marks on still images.
ON To write a print mark on the recorded still
images you want to print out later.
z OFF Not to protect images.
ON To protect selected images against accidental
erasure (p. 134).
—— To play back images in a continuous loop (p. 133).
—— To delete all the unprotected images (p. 136).
z RETURN To cancel formatting.
OK To format an inserted "Memory Stick."
1. Select FORMAT with the SEL/PUSH EXEC
dial, then press the dial.
2. Turn the SEL/PUSH EXEC
dial to select OK, then press the dial.
3. After "EXECUTE" appears, press the SEL/
PUSH EXEC dial. "FORMATTING" flashes
during formatting. "COMPLETE" appears when
formatting is finished.
—— To duplicate still images on mini DV tape onto
"Memory Stick"(p. 118).
z ON To search using cassette memory (p. 51).
OFF To search without using cassette memory.
—— To erase the title you have superimposed (p. 79).
z ON To display the title you have superimposed.
OFF Not to display the title.
—— To label a cassette (p. 82).
—— To erase all the data in cassette memory.
FORMAT ERROR" is displayed.
POWER
switch
VCR
MEMORY
VCR
MEMORY
MEMORY
MEMORY
MEMORY
VCR
VCR
VCR
CAMERA
VCR
VCR
CAMERA
VCR
CAMERA