Sony Handycam DCR-PC110 Operating Instructions Manual page 30

Recording a still image on a tape – Tape Photo recording
Recording images with the flash
The flash pops up automatically. The default setting is auto (no indicator). To change
the flash mode, press the
the LCD screen or in the viewfinder.
Each press of
The flash is adjusted to the appropriate brightness through the photocell window for
the flash. You can also change FLASH LVL to the desired brightness in the menu
settings (p. 84). Try recording various images to find the most appropriate setting for
FLASH LVL.
30
(flash)
(flash) changes the indicator as follows:
(No indicator) t
Auto red-eye reduction: The flash fires before recording to reduce the red-eye
Forced flash:
No flash:
(flash) repeatedly until the flash mode indicator appears on
t t t (No indicator)
phenomenon.
The flash fires regardless of the surrounding brightness.
The flash does not fire.