End Search - Sony Handycam DCR-PC110 Operating Instructions Manual

Recording a picture

END SEARCH

You can go to the end of the recorded portion after you record.
In the standby mode, press END SEARCH.
The last 5 seconds of the recorded portion are played back and your camcorder returns
to the standby mode. You can monitor the sound from the speaker or headphones.
END
SEARCH
To stop searching
Press END SEARCH again.
If you use a tape without cassette memory
The end search function does not work once you eject the cassette after you have
recorded on the tape. If you use a tape with cassette memory, the end search function
works even once you eject the cassette.
If there is a blank portion at the beginning or between the recorded portions, the end
search function may not work correctly (p. 138).
23