Recording A Moving Picture From Other Equipment - Sony Handycam DCR-PC110 Operating Instructions Manual

Recording a picture from a mini DV tape as a moving picture

Recording a moving picture from other equipment

(1) Set the POWER switch to VCR and set DISPLAY in
(2) Play back the recorded tape, or turn the TV on to see the desired program.
(3) Follow steps 3 on page 112.
Using the A/V connecting cable
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your camcorder and
the TV or VCR.
This connection produces higher quality DV format pictures.
Using the i.LINK cable (DV connecting cable)
DV S VIDEO
DV OUT
: Signal flow
Note
The "
Stick" again, and record distortion-free images.
– When recording on a tape in a poor recording state, for example, on a tape that has
been repeatedly used for dubbing
– When attempting to input images that are distorted due to poor radio wave reception
when a TV tuner unit is in use
During recording on "Memory Stick"
Do not eject the cassette tape from your camcorder. During ejecting the tape, sound is
not recorded on the "Memory Stick."
114
The image of the other equipment is displayed on the LCD screen or in the viewfinder.
OUT
S VIDEO
VIDEO
: Signal flow
LANC
(not supplied)
" flashes in the following instances. If this happens, eject and insert "Memory
to LCD in the menu settings.
S VIDEO
AUDIO/VIDEO
DV IN/OUT