Sony Handycam DCR-PC110 Operating Instructions Manual page 116

Superimposing a still image in a "Memory Stick" on a moving
picture – MEMORY MIX
Before operation
•Insert a mini DV tape for recording into your camcorder.
•Insert a recorded "Memory Stick" into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY MIX in the standby mode.
(3) Press MEMORY+/– to select the still image you want to superimpose.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
(5) Press the SEL/PUSH EXEC dial.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
(7) Press START/STOP to start recording.
3
116
The last recorded still image on "Memory Stick" appears on the lower part of
the screen as a thumbnail image.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
The mode changes as follows:
M.CHROM y M.LUMI y C.CHROM y M. OVERLAP
The still image is superimposed on the moving picture. Your camcorder
automatically returns to the standby mode.
2
MEMORY
MIX
M. CHROM
Still image
4
5
100–0021
6
1
POWER
M. LUMI
100–0021
M. LUMI I I I • • • •
100–0021
M. LUMI I • • • • • •
100–0021