Warning Indicators And Messages - Sony Handycam DCR-PC110 Operating Instructions Manual

Warning indicators and messages

If indicators and messages appear in the viewfinder or the LCD screen, check the
following:
See the page in parentheses "( )" for more information.
Warning indicators
100-0001 Warning indicator as to file
Slow flashing:
•The file is corrupted.
•The file is unreadable.
•You are trying to carry out MEMORY MIX
function on moving picture.
C:21:00 Self-diagnosis display (p. 148).
E The battery is dead or nearly dead
Slow flashing:
•The battery is nearly dead.
Depending on conditions and battery pack
models, the E indicator may flash, even if
there are approximately 5 to 10 minutes
remaining.
Fast flashing:
•The battery is dead (p. 11).
% Moisture condensation has occurred*
Fast flashing:
•Eject the cassette, turn off your camcorder,
and leave it for about 1 hour with the cassette
compartment open (p. 152).
Warning indicator as to cassette
memory*
Slow flashing:
•No tape with cassette memory is inserted
(p. 138).
Warning indicator as to "Memory
Stick"*
Slow flashing:
•No "Memory Stick" is inserted.
Fast flashing:
•The "Memory Stick" is not readable with
your camcorder (p. 93).
•The image cannot be recorded on "Memory
Stick" (p. 114).
Warning indicator as to "Memory Stick"
formatting
Fast flashing:
• "Memory Stick" is not formatted correctly (p. 88).
•The "Memory Stick" data is corrupted.*
100–0001 C:21:00
Q Warning indicator as to tape
Slow flashing:
•The tape is near the end.
•No tape is inserted.*
•The write-protect tab on the cassette is out
(red) (p. 14).*
Fast flashing:
•The tape has run out.*
Z You need to eject the cassette*
Slow flashing:
•The write-protect tab on the cassette is out
(red) (p. 14).
Fast flashing:
•Moisture condensation has occurred (p. 152).
•The tape has run out.
•The self-diagnosis display function is
activated (p. 148).
- The still image is protected*
Slow flashing:
•The still image is protected (p. 134).
Warning indicator as to the flash
Slow flashing:
•During charging.
Fast flashing:
•The self-diagnosis display function is
activated (p. 148).*
•There is something wrong with the built-in
flash or the external flash (not supplied).
* You hear the melody or beep sound.
149