Sony Handycam DCR-PC110 Operating Instructions Manual page 70

Recording video or TV programs
Using the i.LINK cable (DV connecting cable)
Simply connect the i.LINK cable (DV connecting cable) (not supplied) to DV IN/OUT
and to DV IN/OUT of the DV products. With digital-to-digital connection, video and
audio signals are transmitted in digital form for high-quality editing.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder,
(2) Set the POWER switch to VCR on your camcorder.
(3) Set DISPLAY in
(4) Press z REC and the button on its right simultaneously on your camcorder,
(5) Press N on the VCR to start playback. The picture to be recorded appears on
(6) Press X on your camcorder at the scene where you want to start recording
DV S VIDEO
DV OUT
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Using the Remote Commander
In step 4, press z REC and MARK simultaneously, then immediately press X. And in
step 6, press X at the scene where you want to start recording from.
Note on the Remote Commander
Your camcorder works in the commander mode VTR 2. Commander modes 1, 2 and 3
are used to distinguish your camcorder from other Sony VCRs to avoid remote control
misoperation. If you use another Sony VCR in the commander mode VTR 2, we
recommend changing the commander mode or covering the sensor of the VCR with
black paper.
You can connect one VCR only using the i.LINK cable (DV connecting cable)
During digital editing
The color of the display may be uneven. However this does not affect the dubbed
picture.
If you record playback pause picture with the DV IN/OUT jack
The recorded picture becomes rough. And when you play back the picture using your
camcorder, the picture may jitter.
Before recording
Make sure if the DV IN indicator appears on the LCD screen or in the viewfinder. The
70
DV IN indicator may appear on both equipment.
and insert the recorded tape into the VCR.
then immediately press X on your camcorder.
the LCD screen or in the viewfinder.
from.
4
LANC
(not supplied)
to LCD in the menu settings (p. 84).
REC
PAUSE
DV IN/OUT