Recording A Moving Picture From Other Equipment - Sony Handycam DCR-TRV730E Operating Instructions Manual

Recording moving pictures from
a tape
When the access lamp is lit or flashing
Do not shake or strike the unit. As well do not
turn the power off , eject a "Memory Stick" or
remove the battery pack. Otherwise, the image
data breakdown may occur.
Data code recorded on a tape
You cannot record the data code recorded on a
tape.
If " AUDIO ERROR" is displayed
Sound that cannot be recorded by your
camcorder has been recorded. Connect the A/V
connecting cable to input images from an
external unit used to play back the image.
The picture may be recorded on the "Memory
Stick" incorrectly if:
– you turn the POWER switch during recording
– you press any video control buttons during
recording
– between the scenes recorded in the Digital8
system and in the Hi8/standard 8 system.
Recording a moving picture
from other equipment
Before operation
Set DISPLAY to LCD in the menu settings. (The
default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Play back the recorded tape, or turn the TV on
to see the desired programme.
The image of the other equipment is
displayed on the screen.
(3) Follow steps 3 on page 147.
Using the A/V connecting cable
: Signal flow/
Connect the yellow plug of the A/V connecting
cable to the video jack on the VCR or the TV.
148
OUT
S VIDEO
VIDEO
(1)
(2)
(3)
S VIDEO
AUDIO/VIDEO