Honeywell DC1000 Series Product Manual page 54

Programmer (Optional)
Displays
Output Limit for Segment 5
SET
Setpoint for Segment 6
SET
Time Setting for Segment 6
SET
Output Limit for Segment 6
SET
Setpoint for Segment 7
SET
Time Setting for Segment 7
SET
Output Limit for Segment 7
SET
Setpoint for Segment 8
SET
Time Setting for Segment 8
SET
Output Limit for Segment 8
SET
*A Ramp Segment is the time it will take to change the setpoint to the next setpoint
value in the program.
** A Soak Segment is a combination of soak setpoint (value) and a soak duration
(time).
46
Parameter
Back to "Operation" Mode – See Table 3-3
DC1010/1020/1030/1040 Product Manual
Description
Range: 0 to 100%
If OUT = 0, program will end
Range:
LSPL (Lower Setpoint Limit) to
USPL (Upper Setpoint Limit)
See Table 4-2 for Limit settings
Range: 0-99 hrs:59 minutes
Ramp segment* = Changing Setpoint time
Soak segment** = Fixed Setpoint time
Range: 0 to 100%
If OUT = 0, program will end
Range:
LSPL (Lower Setpoint Limit) to
USPL (Upper Setpoint Limit)
See Table 4-2 for Limit settings
Range: 0-99 hrs:59 minutes
Ramp segment* = Changing Setpoint time
Soak segment** = Fixed Setpoint time
Range: 0 to 100%
If OUT = 0, program will end
Range:
LSPL (Lower Setpoint Limit) to
USPL (Upper Setpoint Limit)
See Table 4-2 for Limit settings
Range: 0-99 hrs:59 minutes
Ramp segment* = Changing Setpoint time
Soak segment** = Fixed Setpoint time
Range: 0 to 100%
If OUT = 0, program will end
8/05