Honeywell DC1000 Series Product Manual page 36

Configuration
Displays
Default Value
shown except for
examples
Wait Function
SET SET
Extra Set
SET SET
ID Number
SET SET
Baud Rate
SET SET
SP Compensation
SET SET
PV Compensation
SET SET
Unit of PV and SP
SET SET
Soft Filter
SET SET
* DO NOT change this value
SET SET
Operation Mode
(Control Action)
SET SET
Control Process
SET SET
Frequency
SET SET
** These two parameters are only for adjusting the linear signal of the control output, not for the limitation of the
control output or any other purpose. DO NOT change these values without technical assistance.
28
Parameter
To set "WAIT" for program operation
DO NOT change the value of this parameter
Communication ID Number
DO NOT change the value of this parameter
Range: -1000 to 1000
Range: LSPL – USPL
Used to Bias Process Variable
Selection: C, F, and A (linear)
Adjusts the PV response time (Range: 0.05 to 1.00)
(Larger value = faster response)
Heating or Cooling
PID or Fuzzy
50 or 60 Hz
CAUTION: Make sure the proper frequency is selected.
DC1010/1020/1030/1040 Product Manual
Description
8/05