Mode Access; How To Move From One Mode To Another; Table 3-2 Mode Change Instructions; Figure 3-2 Mode Access Diagram - Honeywell DC1000 Series Product Manual

3.3 Mode Access

3.3.1

How to move from one mode to another

Refer to Figure 3-2 and Table 3-2 for instructions.
Step
(1)
(2)
(3)
ATTENTION Do not access 'set up' mode without technical assistance.
8/05
Operation Operation
(3) (3)
Program Program
(3) (3)

Figure 3-2 Mode Access Diagram

Table 3-2 Mode Change Instructions

Press 'SET' key for 5 seconds, it grants access to
'Configuration 1' mode or return to 'Operation' mode from
'Configuration 1' mode.
Press 'SHIFT' key for 5 seconds while pressing 'SET' key first, it
grants access to 'Configuration 2' mode or return to 'Operation'
mode.
All parameters related to program configuration will be displayed
next to parameters in 'Operation' mode. (* These parameters will
be shown in program model only)
DC1010/1020/1030/1040 Product Manual
(1) (1)
Configuration 1 Configuration 1
(2) (2)
(2) (2)
Configuration 2 Configuration 2
Set Up Set Up
Action
Operation
19