ActionTec GT701R User Manual page 44

RFC 1483 via Static IP
Select this option if the
address, which causes the
IP
the Modem, as opposed to the
to terminate at the computer. This allows the use of the router capabilities for
the Local Area Network (
addresses provided by the
☞
Note: Contact the
Encapsulation
If the Modem is configured to obtain an
static address, select the appropriate encapsulation option used by the ISP (
IP
Bridged or
1483 RFC 1483
☞
Note: Contact the
For more information about setting up the Modem to use a static
chapter 4, "Setting Up Static
Chapter 6 Configuring Advanced Settings
service is configured to use
ISP
address and routing information to terminate at
IP
address and routing information being bridged
IP
). Enter the
LAN
in the appropriate text boxes,.
ISP
if unsure of the proper configuration.
ISP
Routed).
if unsure of the proper configuration.
ISP
Addresses," on page 15.
IP
RFC
, subnet mask, and default gateway
IP
address through
IP
39
1483 using a static
or to specify a
DHCP
address, see
IP
RFC