ActionTec GT701R User Manual page 9

Actiontec USB/Ethernet DSL Modem User Manual
Rear Panel
The rear panel of the Modem contains four ports (Phone,
Power), as well as a Power switch and Reset button.
Phone Port
The Phone port is used to connect a
the Modem.
USB Port
The port is used to connect a computer to the Modem via
USB
Ethernet Port
The Ethernet port is used to connect computers to the Modem via Ethernet
cable, and is a 10/100 Mbps port.
Reset Button
To restore the Modem's factory default settings, depress and hold the Reset but-
ton for approximately 10 seconds, or until the Power light glows amber. The
reset process will start about
Power Switch
The Power switch turns the Modem on and off (on if the top part of the switch
is depressed, off if the bottom is depressed).
R e se t
U S B
(Digital Subscriber Line) connection to
DSL
seconds after releasing the Reset button.
10
4
, Ethernet, and
USB
r
P o w e
cable.
USB