Table of Contents
Advertisement
Other programmable key settings
Quick Dial
ACD — Logs you in and out of an Automatic Call
Distribution group (set up with your service provider)
BLF — Busy lamp field keys let you monitor activity
on other phones in your office.
Installation
This section assumes that your network infrastructure is established and that the SIP
PBX service has been ordered and configured for your location.
Install the phone close to a router or network switch. If you are not using PoE, install
the phone near a power outlet not controlled by a wall switch. The phone can be
placed on a flat surface or vertically mounted on the wall.
Avoid placing the phone too close to:
Communication devices such as television sets, DVD players, or cordless
telephones.
Excessive heat sources.
Noise sources such as a window with traffic outside, motors, microwave ovens,
refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock such as on top of a washing machine or work
bench.
NOTE: The phone shall be installed and used such that parts of the user's body other
than the hands are maintained at a distance of approximately 20 cm (8 inches) or
more.
Figure 1: SB8725 Installation Example
IP Phone User's Guide
3
Advertisement
Table of Contents
