Using the BIOS Setup Utility
Configuring for New Disk Drives
These sections describe how to configure new disk drives in the BIOS Setup utility.
Diskette Drive Configuration
Diskette drives need to be configured from within the BIOS Setup utility once the new
diskette drive is installed.
To configure a newly installed diskette drive, proceed as follows:
1. Reboot the computer and enter Setup.
2. Highlight the Main menu.
3. Highlight "Diskette A" or "Diskette B" (depending upon how you connected
the diskette drive to your computer).
4. Press the [+] key to sequence through the available options.
5. Press [Esc] then [Enter] twice to exit the BIOS Setup utility and to reboot the
computer so changes immediately take affect.
2-14